16K Signature Series Fifth Wheel Trailer Hitch with Slider by Draw-Tite and Reese - Capacity: 16,000 lbs. Gross Trailer Weight | 4,000 lbs. Pin Weight
- 10° Front to Back Pivot
- 14" to 18" Vertical Height Adjustment
- Custom fifth wheel rails are installed under the truck bed allowing for unrestricted truck bed use when the fifth wheel is removed
- Removal of fifth wheel hitch from truck bed can easily be done by one person
- Improved locking jaw will not open when the hitch and king pin of the trailer are properly connected - at least without the manual release
- Increased stability due to the wider foot mount
- Wider king pin funnel area (9" as opposed to 6")
- 7-year Limited Warranty
- Uses Under-Bed Installation Kit (Sold Separately)
| Fifth Wheel Trailer Hitch does not include rails or installation kit. To find the custom installation kit for your truck use the HitchHunter® fitguide. | | | Draw-Tite and Reese Signature Series Fifth Wheel Trailer Hitch Slider - 10" Front to Back Travel
- Fits Both 16K and 18K Signature Series Models
- Can Operate From Either Side of Unit
- Angled Steel Rollers Reduces Binding
- Operation up to 45° Angle
- Round Tube Design Allows for Smoother Operation
- Rubber Grip Handle for Comfortable Use
Fifth Wheel Sliders are used on short bed pickups to prevent damage to both the truck and trailer when maneuvering in tight locations and at low speeds. When pulling a fifth wheel trailer, the king pin needs to be in front of the rear axle. On short bed trucks, the trailer is closer to the cab of the truck so on sharp turns the trailer could actually come in contact with the truck cab. The slider provides a greater turning clearance by moving the king pin farther back to the rear of the truck when maneuvering at low speeds around camp sites etc, providing a greater turning clearance. Typical Installation Instructions
   | Fifth Wheel Trailer Hitch does not include rails or installation kit. To find the custom installation kit for your truck use the HitchHunter® fitguide. | | | |
