| Ballmounts |
|---|
| Ballmounts  | For 2"x2" Receivers (Class III and larger) you should check out our Step by Step guide to selecting the correct trailer hitch ballmount. Note: For Class I and II Trailer Hitches (1-1/4" x 1-1/4"), the manufacturer will require a specific ballmount/drawbar. You can use the Hitch Hunter™ to find the recommended item.
|
|
989899
etrailer.com Ballmount Kit
etrailer.com™ Ballmount Kit Kit Includes: - (2) Ballmounts with 3/4" Rise / 2" Drop (#2923)
- (1) 1-7/8" x 1" x 2-1/8" Trailer Hitch Ball (#19260)
- (1) 2" x 1" x 2-1/8" Trailer Hitch Ball (#19247)
- (1) Pin and Clip (#PC3)
- (1) etrailer.com® Ballmount Bag (#ETBMB)
|
2923
Ballmount 3/4" Rise or 2" Drop - Angle Cut
Trailer Hitch Ballmount features an angle cut. This allows the ballmount to easily slide into the receiver tube. - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 8-1/2" long from center of pin hole to center of ball hole.
- Ballmount provides 3/4" rise or 2" drop from the top of your hitch's receiver tube.
- Rated for upto 6000lb. and upto 600lb. tongue weight.
Class III (2" x 2") Ballmount Accessories
|
CR-701
Stainless Steel Ballmount 3/4" Rise or 2" Drop
Stainless Steel Trailer Hitch Ballmount - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 7-3/4" long from center of pin hole to center of ball hole.
- Ballmount provides 3/4" rise or 2" drop from the top of your hitch's receiver tube.
- Rated for upto 6000 lb. and upto 600 lb. tongue weight.
- Stainless Steel - Resists Rust and Corrosion
Class III (2" x 2") Ballmount Accessories
|
2736
Ballmount 3/4" Rise or 2" Drop - Extra Long
Draw-Tite Trailer Hitch Ball Mount - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 12" long from center of pin hole to center of ball hole.
- Ballmount provides 3/4" rise or 2" drop from the top of your hitch's receiver tube.
- Rated for upto 5000 lb. and upto 500 lb. tongue weight.
Class III (2" x 2") Ballmount Accessories
|
40330
Forged Ballmount 1" Rise or 2" Drop 10,000 lbs.
- Solid One-Piece Forged Construction
- Double Powdercoat Finish
- Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1-1/4" shank diameter.
- Ballmount is 8-1/2" long from center of pin hole to center of ball hole.
- Ballmount provides 1" rise or 2" drop from the top of your hitch's receiver tube.
- Rated for upto 10,000 lb. and upto 1,000 lb. tongue weight.
- Ball Platform is 1" Thick and 3" Wide
- Requires Ball with at least a 2-1/2" long shank
- Angled Quick Load Design
Class III (2" x 2") Ballmount Accessories Reese #21330
|
4280
Ballmount 1" Rise or 2" Drop 12,000 lb.
- Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1-1/4" shank diameter.
- Ballmount is 8-1/2" long from center of pin hole to center of ball hole.
- Ballmount provides 1" rise or 2" drop from the top of your hitch's receiver tube.
- Rated for upto 12,000 lb. and upto 1,200 lb. tongue weight.
- 1" Thick x 3" Wide Ball Platform
Class III (2" x 2") Ballmount Accessories
|
CR-702
Ballmount 1-3/4" Rise or 3" Drop - Stainless Steel
Stainless Steel Trailer Hitch Ballmount - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 9-1/8" long from center of pin hole to center of ball hole.
- Ballmount provides 1-3/4" rise or 3" drop from the top of your hitch's receiver tube.
- Rated for upto 6000 lb. and upto 600 lb. tongue weight.
- Stainless Steel - Resists Rust and Corrosion
Class III (2" x 2") Ballmount Accessories
|
2753
Ballmount 2-3/4" Rise or 4" Drop
- Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 8-1/8" long from center of pin hole to center of ball hole.
- Ballmount provides 2-3/4" rise or 4" drop from the top of your hitch's receiver tube.
- Rated for upto 6000 lb. and upto 600 lb. tongue weight.
Class III (2" x 2") Ballmount Accessories
|
80228
Ballmount 2-3/4" Rise or 4" Drop - Extra Long
- Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 11-1/4" long from center of pin hole to center of ball hole.
- Ballmount provides 2-3/4" rise or 4" drop from the top of your hitch's receiver tube.
- Rated for up to 6000 lb. and up to 600 lb. tongue weight.
Class III (2" x 2") Ballmount Accessories
|
80233
Ballmount 2-3/4" Rise or 4" Drop - Extra Extra Long
- Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 16" long from center of pin hole to center of ball hole.
- Ballmount provides 2-3/4" rise or 4" drop from the top of your hitch's receiver tube.
- Rated for up to 6000 lb. and up to 600 lb. tongue weight.
Class III (2" x 2") Ballmount Accessories
|
40331
Forged Ballmount 3" Rise or 4" Drop 10,000 lbs
- Solid One-Piece Forged Construction
- Double Powdercoat Finish
- Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1-1/4" shank diameter.
- Ballmount is 9-1/4" long from center of pin hole to center of ball hole.
- Ballmount provides 3" rise or 4" drop from the top of your hitch's receiver tube.
- Rated for upto 10,000 lb. and upto 1,000 lb. tongue weight.
- Ball Platform is 1" Thick and 3" Wide
- Requires Ball with at least a 2-1/2" long shank
- Angled Quick Load Design
Class III (2" x 2") Ballmount Accessories Reese #21331
|
4281
Ballmount 3" Rise or 4" Drop 12,000 lb.
Trailer Hitch Ball Mount - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1-1/4" shank diameter.
- Ballmount is 8-1/2" long from center of pin hole to center of ball hole.
- Ballmount provides 3" rise or 4" drop from the top of your hitch's receiver tube.
- Rated for upto 12,000 lb. and upto 1,200 lb. tongue weight.
- 1" Thick x 3" Wide Ball Platform
Class III (2" x 2") Ballmount Accessories
|
80240
Ballmount 4-3/4" Rise 6" Drop
Ballmount features an angle cut. This allows the ballmount to easily slide into the receiver tube. - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 9-3/4" long from center of pin hole to center of ball hole.
- Ballmount provides 4-3/4" rise or 6" drop from the top of your hitch's receiver tube.
- Rated for upto 6000 lb. and upto 600 lb. tongue weight.
Class III (2" x 2") Ballmount Accessories
|
40332
Forged Ballmount 5" Rise or 6" Drop 10,000 lbs
- Solid One-Piece Forged Construction
- Double Powdercoat Finish
- Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1-1/4" shank diameter.
- Ballmount is 10-1/4" long from center of pin hole to center of ball hole.
- Ballmount provides 5" rise or 6" drop from the top of your hitch's receiver tube.
- Rated for upto 10,000 lb. and upto 1,000 lb. tongue weight.
- Ball Platform is 1" Thick and 3" Wide
- Requires Ball with at least a 2-1/2" long shank
- Angled Quick Load Design
Class III (2" x 2") Ballmount Accessories Reese #21332
|
4282
Ballmount 5" Rise or 6" Drop 12,000 lb.
Trailer Hitch Ball Mount - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1-1/4" shank diameter.
- Ballmount is 9-1/2" long from center of pin hole to center of ball hole.
- Ballmount provides 5" rise or 6" drop from the top of your hitch's receiver tube.
- Rated for upto 12,000 lb. and upto 1,200 lb. tongue weight.
- 1" Thick x 3" Wide Ball Platform
Class III (2" x 2") Ballmount Accessories
|
2793
Ballmount 6-3/4" Rise or 8" Drop
Draw-Tite Trailer Hitch Ball Mount - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 10" long from center of pin hole to center of ball hole.
- Ballmount provides 6-3/4" rise or 8" drop from the top of your hitch's receiver tube.
- Rated for upto 5000 lb. and upto 500 lb. tongue weight.
Class III (2" x 2") Ballmount Accessories
|
4283
Ballmount 7" Rise or 8" Drop 12,000 lb.
Trailer Hitch Ball Mount - Ballmount fits 2" x 2" receiver style hitches.
- Uses ball with 1-1/4" shank diameter.
- Ballmount is 9-1/2" long from center of pin hole to center of ball hole.
- Ballmount provides 7" rise or 8" drop from the top of your hitch's receiver tube.
- Rated for upto 12,000 lb. and upto 1,200 lb. tongue weight.
- 1" Thick x 3" Wide Ball Platform
Class III (2" x 2") Ballmount Accessories
|
BM10
Trailer Hitch Ballmount 10" Drop
Trailer Hitch Ball Mount - Ballmount fits 2" x 2" trailer hitches.
- Uses ball with 1" shank diameter.
- Ballmount is 10-1/2" long from center of pin hole to center of ball hole.
- Ballmount provides 10" drop from the top of your hitch's receiver tube.
- Rated for up to 5000 lb. and up to 500 lb. tongue weight.
Note: Use of any ballmount with a 10" drop reduces the trailer hitch capacity by 1/3. Your towing capacity is limited to 2/3 of your lowest rated towing component - be it the vehicle, hitch, balmount, hitch ball etc. Do not use with hitch extenders. Do not use in reverse position. Class III (2" x 2") Ballmount Accessories
|
TK5007
Ballmount Adjustable Fits 2" Trailer Hitch Receiver
Convert-A-Ball Adjustable Ball Mounts are ideal for applications where one vehicle will be towing trailers of varying coupler heights. The shank can be turned up or down for high or low ground clearance applications. - Capacity: 5,000 lbs Gross Towing Weight
- Fits 2" x 2" trailer hitch receivers
- Ball Hole: 1" Diameter
- Measures 13" from the center of the hitch pin hole to the center of the ball hole
- Maximum Rise: 9"
- Maximum Drop: 10-1/4"
- Powder coated black finish
Class III (2" x 2") Ballmount Accessories
|
80412
Ballmount Adjustable Fits 2" Trailer Hitch Receiver
Perfect for towing trailers of varying coupler heights. Adjustable to 12 different ball height positions. Shank can be used in the up or down position as required for high or low ground clearance. - Maximum Rise 8.375"
- Maximum Drop 9.625"
- 2" x 2" Shank
- 6,000 lb. Gross Towing Weight
- 600 lb. Tongue Weight
- Adjusts Conveniently using Included 5/8" Pins
- Measures 12" from the center of the hitch pin hole to the center of the ball hole
- 7-1/2" from the center of the hitch pin hole to the adjustable holes
- Ball Platform Thickness: 3/4"
- Requires ball with 1" diameter shank
Class III (2" x 2") Ballmount Accessories
|
2841AT
Ballmount Adjustable, E-Z Adjust fits 2" Trailer Hitch Receiver
Master Lock E-Z Adjust™ Ballmount makes finding the correct rise or drop for your trailer connection easy! Simply turning the E-Z Adjust™ hex head raises and lowers the ball platform to the perfect height. The platform infinitely adjusts from a 7-3/4" drop to a 6-1/4" rise. - Capacity: 5,000 lbs Gross Towing Weight
- Fits 2" x 2" trailer hitch receivers
- Ball Hole: 1" Diameter
- Works great with Master Lock One Tool Torque™ trailer hitch balls
- One Tool Torque™ allows the hitch ball to tightened to the ballmount with only one wrench because the ball is kept from turning through this no spin design
- Ballmount can be used with standard hitch balls
- Measures 12-1/2" from the center of the hitch pin hole to the center of the ball hole
- E-Z Adjust™ - Ballmount height adjusts with standard 7/8" socket, 7/8" wrench or 3/8" socket drive from the top or bottom of the ballmount, with or without the trailer connected
- Maximum Rise: 6-1/4"
- Maximum Drop: 7-3/4"
Class III (2" x 2") Ballmount Accessories   
|
7390
Ballmount Adjustable With Sway Control Tab
- Rated at 6,000 lb. gross towing weight and upto 600 lb. tongue weight.
- Shank may be used in the rise or drop position
- 2" x 2" Square Hollow Shank
- Platform mounts for left or right hand sway control attachment
- Maximum rise of 3-3/4"
- Maximum drop of 5-1/4"
Class III (2" x 2") Ballmount Accessories
|
D-43
1-7/8" (Drop) and 2" (Rise) Reversible Ball Mount
- 1-7/8" (Drop - 2") and 2" (Rise - 3/4") Reversible Ball Mount
- Black Painted
- For Use with 2" x 2" Receiver Hitches
- Measures 11" from the center of the hitch pin hole to the center of the ball
- 600 lbs Max Tongue Weight
- Towing Capacity Depends on the Weight Capacity of Ball
- 3,500 lbs for 1-7/8" ball
- 6,000 lbs for 2" ball
Class III (2" x 2") Ballmount Accessories
|
80404
1-7/8" (Rise) and 2" (Drop) Reversible Ball Mount
- 1-7/8" (Rise - 3/4") and 2" (Drop - 2") Reversible Ball Mount
- Black Painted
- For Use with 2" x 2" Receiver Hitches
- 500 lbs Max Tongue Weight
- Towing Capacity Depends on the Weight Capacity of Ball
Class III (2" x 2") Ballmount Accessories
|
D-44
2" (Drop) and 2-5/16" (Rise) Reversible Ball Mount
- 2" (Drop - 2") and 2-5/16" (Rise - 3/4") Reversible Ball Mount
- Black Painted
- For Use with 2" x 2" Receiver Hitches
- 500 lbs Max Tongue Weight
- Towing Capacity Depends on the Weight Capacity of Ball
Class III (2" x 2") Ballmount Accessories
|
V76210
Three Ball - Ball Mount - Chrome
Chrome Three Ball Ballmount - 1-7/8", 2" and 2-5/16" Balls Mounted on a Solid Shank
- Chrome finish
- For Use with 2" x 2" Trailer Hitches
- Towing Capacity Depends on the Weight Capacity of Ball
- 1-7/8" Ball - 2,000 lbs.
- 2" Ball - 6,000 lbs.
- 2-5/16" Ball - 10,000 lbs.
Class III (2" x 2") Ballmount Accessories
|
2948DAT
Three Ball - Ball Mount - Black
Black Three Ball Ballmount - 1-7/8", 2" and 2-5/16" Balls Mounted on a Solid Shank
- Black powder coat finish
- For Use with 2" x 2" Trailer Hitches
- Towing Capacity Depends on the Weight Capacity of Ball
- 1-7/8" Ball - 3,500 lbs.
- 2" Ball - 6,000 lbs.
- 2-5/16" Ball - 10,000 lbs.
- Measures 8" from the center of the hitch pin hole to the center of the ball (1-7/8" and 2" balls). Measures 6-1/2" from the center of the hitch pin hole to the center of the 2-5/16" ball.
- Measures 4" from the center of the hitch pin hole to the end of the shank on when using the 2-5/16" ball
Class III (2" x 2") Ballmount Accessories
|
53410
Two Balls and Sticks Hitch Aligner
Was $29.95! A fast, safe and reliable hitching aid for all types of trailers including fifth wheels and goosenecks! - Quickly line up your trailer without assistance
- Rods have strong heavy-duty magnets on the bottom to attach to the trailer and the hitch
- Yellow balls are easy to see
- Rods telescope up to 42-1/4"
- Rods collapse down to 13-1/2" for easy storage
- Chrome finish resists rust and corrosion
 
|
|
