| Adapters |
|---|
80303
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
This adapter allows you to use your current hitch accessories in either a 2" or an 1-1/4" receiver hitch. This adapter is not to be used for towing. - Convert any Class II 1-1/4" Receiver to a 2" Receiver
- Will Not Fit Class I 1-1/4" Receiver
- Black Painted Finish
- 6" Long from Pin Hole to Pin Hole
- Maximum tongue weight is the lowest of the following
- 50% of the tongue weight shown on the rating sticker of your trailer hitch
- 300 lbs.
- Shank of hitch accessory (bike rack etc.) can not be more than 2-3/4" long from the center of the hitch pin hole to the end of the shank (end that slides into the hitch)
|
HTAD
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
This adapter allows you to use your current hitch accessories in either a 2" or a 1 1/4" receiver hitch. - Convert any 1 1/4" to a 2" receiver (not to be used for towing)
- Powder coated black finish
- Measures 7-1/4" from pin hole to pin hole
- Rated at 300 lbs. tongue capacity
- Shank of hitch accessory (bike rack etc.) can not be more than 3-3/8" long from the center of the hitch pin hole to the end of the shank (end that slides into the hitch)
|
ht02
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver
This adapter allows you to use your current hitch accessories in either a 2" or a 1 1/4" receiver hitch. - Convert and 2" receiver to 1-1/4" (1/2" Hitch Pin Included)
- Max Tongue Weight: 300 lbs.
- Towing Capacity: 3,000 lbs. or the lowest rated towing component
- Measures 3" from center of pin hole to center of pin hole
- Powder coated black finish
|
80300
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver
This adapter allows you to use your current hitch accessories in either a 2" or a 1 1/4" receiver hitch. - Converts 2" receiver to 1-1/4"
- Black Painted Finish
- Measures 7" from Pin Hole to Pin Hole
- Maximum trailer weight is the lowest of the following
- 50% of the towing capacity shown on the rating sticker of your trailer hitch
- Vehicle towing capacity, per your owner's manual
- 3,500 lbs.
- Maximum tongue weight is the lowest of the following
- 50% of the tongue weight shown on the rating sticker of your trailer hitch
- 300 lbs.
|
RM-070
4" High - Low Drop
Designed for Falcon and Sterling tow bars BUT can fit any 2" square receiver. The 4" & 6" High- Low Drops allow your towing system to be connected at a safe level height. Only for towing a car behind a motor home. Not for use with any type of trailer. All are 6,000 lb. GVWR and 100 lb. tongue weight.
|
RM-076
6" High - Low Drop
Designed for Falcon and Sterling tow bars BUT can fit any 2" square receiver. The 4" & 6" High- Low Drops allow your towing system to be connected at a safe level height. Only for towing a car behind a motor home. Not for use with any type of trailer. All are 6,000 lb. GVWR and 100 lb. tongue weight.
|
