| Pintle / Lunette |
|---|
PH2S
Pintle Hitch (Stainless Steel)
Cushioned Pintle Hitch with 3 ball combination and pintle sleeve for use in a standard 2" receiver hitch. Includes Stainless Steel 3 ball interchangeable ball system and pintle sleeve. The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Easy to install
- Proven effective in reducing bounce and rhythmic vibrations
- For use with underframe receiver hitch with a 2" square socket
- Class IV, V-5 Safe
Shanks are 2"x2" tube with 1/4" wall thickness. Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 16,000 lbs. Maximum tongue weight of of 800 lbs.
Rated Class 4. Rated V-5.
Meets SAE standard J-847.  | Cut-Away View of the Shank that shows the Polyurethane Cushions | Drawing of what is included. | | |
|
PH2
Pintle Hitch (Chrome)
- A spring-loaded, double engagement latch locks through the pintle sleeve for increased strength and reliability.
- Both an automatic rust proff latch lock and a manual safety pin insure safe hookups.
- Quick conversion from pintle hitch to ball hitch to clevis hitch without the need for tools.
- Allowable Pintle Ring Sizes:
- Inner Diameter of 3"
- Maximum Outer Diameter of 6-3/8"
- Maximum Ring Cross Section of 1-5/8"
Cushioned Pintle Hitch with 3 ball combination and pintle sleeve for use in a standard 2" receiver hitch. Includes Chrome 3 ball interchangeable ball system and pintle sleeve. Drawing of what is included. | | | The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Easy to install
- Proven effective in reducing bounce and rhythmic vibrations
- For use with underframe receiver hitch with a 2" square socket
- Class IV, V-5 Safe
Shanks are 2"x2" tube with 1/4" wall thickness. Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 16,000 lbs. Maximum tongue weight of of 800 lbs.
Rated Class 4. Rated V-5.
Meets SAE standard J-847. | | Cut-Away View of the Shank that shows the Polyurethane Cushions |
|
PH3
Pintle Hitch with 2" Ball
For use in a standard 2" Receiver. Ball is not inter-changeable.
Maximum Gross Trailer Weight is 16,000 lbs. Maximum Tongue weight is 800 lbs. 
|
43005
Pintle Hook 5 Ton
5 Ton Capacity. 2,000 lbs maximum vertical load. 10,000 lbs GTW
|
43015
Pintle Hook 15 Ton
15 ton capacity. 6,000 lbs maximum vertical load. 30,000 lbs GTW
|
PH1
Bolt on Pintle Hook
Pintle Hook with Ball - A spring-loaded, double engagement latch locks through the pintle sleeve for increased strength and reliability.
- Both an automatic rust proff latch lock and a manual safety pin insure safe hookups.
- Quick conversion from pintle hitch to ball hitch to clevis hitch without the need for tools.
- Allowable Pintle Ring Sizes:
- Inner Diameter between 2-3/8" and 3"
- Maximum Outer Diameter of 6-3/8"
- Maximum Ring Cross Section of 1-5/8"
Maximum trailer weight of 25,000 lbs when using pintle. Balls are rated at maximum of 10,000 lbs. Maximum tongue weight of of 5,000 lbs.
Meets SAE standard J-847.
Has a standard bolt-on pattern for bolting onto a flat surface (Pintle Mount) or one of the cushioned adapters. Includes Stainless Steel 3 ball interchangeable ball system and pintle sleeve.
Drawing of what is included. | | |
|
PH4
Pintle Hook for Adjustable Ballmount
Cushioned Pintle Hitch with 3 ball combination and pintle sleeve for use in a standard 2" receiver hitch. Includes Chrome 3 ball interchangeable ball system with extra long shank and pintle sleeve. Maximum trailer weight of 16,000 lbs. Maximum tongue weight of of 800 lbs.
Meets SAE standard J-847. Drawing of what is included (minus the bolts that hold PH4 to the shank). | | |
|
43020
Pintle Hook Combo With 1-7/8" Ball
Pintle Hook Combo with 1-7/8" Trailer Hitch Ball - Capacity (as Pintle): 16,000 lbs maximum GTW
- 3,000 lbs maximum vertical load (tongue weight)
- 1-7/8" Ball
- Mount Hole Spacing: 3-3/8" (left to right) and 1-3/4" (top to bottom)
|
43021
Pintle Hook Combo With 2" Ball
Pintle Hook Combo with 2" Trailer Hitch Ball - Capacity (as Pintle): 16,000 lbs maximum GTW
- 3,000 lbs maximum vertical load (tongue weight)
- 2" Ball
- Mount Hole Spacing: 3-3/8" (left to right) and 1-3/4" (top to bottom)
|
43022
Pintle Hook Combo With 2-5/16" Ball
Pintle Hook Combo with 2-5/16" Trailer Hitch Ball - Capacity (as Pintle): 16,000 lbs maximum GTW
- 3,000 lbs maximum vertical load (tongue weight)
- 2-5/16" Ball
- Mount Hole Spacing: 3-3/8" (left to right) and 1-3/4" (top to bottom)
|
DPR2000
Pintle Hook Combo 2" Ball with 2" Shank
Drop-forged Combination Pintle Hook/Ball Hitch - 2" Trailer Hitch Ball
- Fits 2" x 2" Trailer Hitch Receivers
- Tongue Weight: 1,000 lbs.
- Ball Capacity: 10,000 lbs.
- Pintle Capacity: 10,000 lbs.
- Pintle combo features a two-stage locking mechanism that locks when used as a pintle hitch or ball hitch
|
DPR2516
Pintle Hook Combo 2-5/16" Ball with 2" Shank
Drop-forged Combination Pintle Hook/Ball Hitch - 2-5/16" Trailer Hitch Ball
- Fits 2" x 2" Trailer Hitch Receivers
- Tongue Weight: 1,000 lbs.
- Ball Capacity: 10,000 lbs.
- Pintle Capacity: 10,000 lbs.
- Pintle combo features a two-stage locking mechanism that locks when used as a pintle hitch or ball hitch
|
43026
Pintle Replacement Ball 1-7/8"
Pintle Combo replacement ball 1-7/8". (Will not fit Buyers pintle combos) - Capacity: 2,000 lbs.
- 1-1/4" Diameter Shank
- Shank Length: 2-3/8"
|
43027
Pintle Replacement Ball 2"
Pintle hook replacement ball 2". (Will not fit Buyers pintle combos) - Capacity: 10,000 lbs.
- 1-1/4" Diameter Shank
- Shank Length: 2-3/8"
|
43028
Pintle Replacement Ball 2-5/16"
Pintle replacement ball 2-5/16". (Will not fit Buyers pintle combo) - Capacity: 12,000 lbs.
- 1-1/4" Diameter Shank
- Shank Length: 2-3/8"
|
43030
Pintle Replacement Pin
Replacement pin for pintle hooks and pintle combo.
|
43076
Pintle Hook Mounting Kit
Pintle hook hardware mounting kit. Includes 4 bolts, washers and nuts.
|
AMPC1
Cushioned Pintle Mounting Bar
The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Easy to install
- Proven effective in reducing bounce and rhythmic vibrations
- For use with underframe receiver hitch with a 2" square socket
- Class IV, V-5 Safe
Shanks are 2"x2" tube with 1/4" wall thickness. Shank hole is 1" diameter. Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 10,000 lbs. Maximum tongue weight of of 2,000 lbs.
Rated Class 4. Rated V-5. Meets SAE Standard J-684.
Be sure that the hitch bar receiver tube is more than 2-3/8" deep if the tube has a closed end. | | Cut-Away View of the Shank that shows the Polyurethane Cushions | 
|
43045
Trailer Hitch Pintle Hook Mount
Trailer Hitch Pintle Hook Mount - 7-1/4" from center of pin hole to mounting face
- 5-1/2" mounting face height
- 10,000 lbs. GTW
- Hollow shank
|
AMPC2
Cushioned Pintle Mounting Bar - 8 Hole
- Bar provides 8 holes to mount pintle
The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Easy to install
- Proven effective in reducing bounce and rhythmic vibrations
- For use with underframe receiver hitch with a 2" square socket
- Class IV, V-5 Safe
Shanks are 2"x2" tube with 1/4" wall thickness. Shank hole is 1" diameter. Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 10,000 lbs. Maximum tongue weight of of 2,000 lbs.
Rated Class 4. Rated V-5. Meets SAE Standard J-684.
Be sure that the hitch bar receiver tube is more than 2-3/8" deep if the tube has a closed end. | | Cut-Away View of the Shank that shows the Polyurethane Cushions | 
|
43049
Trailer Hitch Pintle Hook Mount - 8 Hole
Trailer Hitch Pintle Hook Mount - Pintle hook mounting plate with hollow shank
- Measures 7-1/4" from center of pin hole to mounting face
- 7-1/2" mounting face height
- 10,000 lbs GTW capacity
|
43050
Pintle Hook Mount
Pintle hook mount with solid shank. 10,000 lbs GTW capacity. 7-3/4" from center of pin hole to mounting face. 7-1/2" mounting face height.
|
AMPC3
Cushioned Pintle Mounting Bar - 10 Hole
- Bar has 10 holes to mount pintle
The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Easy to install
- Proven effective in reducing bounce and rhythmic vibrations
- For use with underframe receiver hitch with a 2" square socket
- Class IV, V-5 Safe
Shanks are 2"x2" tube with 1/4" wall thickness. Shank hole is 1" diameter. Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 10,000 lbs. Maximum tongue weight of of 2,000 lbs.
Rated Class 4. Rated V-5. Meets SAE Standard J-684.
Be sure that the hitch bar receiver tube is more than 2-3/8" deep if the tube has a closed end. | | Cut-Away View of the Shank that shows the Polyurethane Cushions |
|
43075
Pintle Hook Mount
Pintle hook mount with solid shank. 10,000 lbs GTW capacity. 10" from center of pin hole to mounting face. 12-1/2" mounting face height.
|
PA-1
Pintle Hitch Adapter
Mounts to AMAC1 weight distributing shank to provide a normal ballmount. - Use 3-1/2" x 3/4", 16-grade 5 Bolts to Mount to Ballmount
- Bolts to mount to AMAC1 are included
- Maximum Trailer Weight: 10,000 lbs.
- Maximum Tongue Weight: 2,000 lbs.
- For use with standard pintle mounts
- Hole spacing is 3-3/8" (left to right) and 1-3/4" (top to bottom)
|
AMCC1
Ballmount / Clevis Hitch - 1 Tang
- May be used as ballmount but is designed as a Clevis hitch
The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Easy to install
- Proven effective in reducing bounce and rhythmic vibrations
- For use with underframe receiver hitch with a 2" square socket
- Class IV, V-5 Safe
Shanks are 2"x2" tube with 1/4" wall thickness. Shank Hole Diameter for ball is 1". Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 5,000 lbs. Maximum tongue weight of of 500 lbs.
Rated Class 4. Rated V-5. Meets SAE Standard J-684.
| | Cut-Away View of the Shank that shows the Polyurethane Cushions |
|
AMCC2
Ballmount / Clevis Hitch - 2 Tang
- May be used as ballmount but is designed as a Clevis hitch
- Can also be used for a pintle ring
The Cushioned Ball Mount
- Acts as a shock absorber
- Protects the towing vehicle's driveline, hitch assembly and trailer contents
- Easy to install
- Proven effective in reducing bounce and rhythmic vibrations
- For use with underframe receiver hitch with a 2" square socket
- Class IV, V-5 Safe
Shanks are 2"x2" tube with 1/4" wall thickness. 1" Clevis Pin Hole. Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 10,000 lbs. Maximum tongue weight of of 2,000 lbs.
Rated Class 4. Rated V-5. Meets SAE Standard J-684.
| | Cut-Away View of the Shank that shows the Polyurethane Cushions |
|
80409
Clevis Mount - Straight
- For Use iwth Industrial / Agricultural Equipment
- Maximum Trailer Weight is 6,000 lbs. Maximum Tongue Weight is 600 lbs.
- 1" Hole for Clevis Pin
|
CA-1
Clevis Hitch Adapter
Mounts to AMAC1 weight distributing shank to provide a normal ballmount. - Shank Hole has 1" Diameter
- Use 3-1/2" x 3/4", 16-grade 5 Bolts to Mount to Ballmount
- Maximum Trailer Weight: 10,000 lbs.
- Maximum Tongue Weight: 2,000 lbs.
|
80411
Clevis Hitch Pin 1" x 5-3/4"
Trailer Hitch Clevis Pin - 1" x 5-3/4"
- Clip Included
|
43077
Lunette Ring - 4 Hole Base
Lunette ring with 2-1/2" diameter with 4 hole base. 35,000 lbs GTW - Holes measure 4-1/2" from center to center up and down
- Holes measure 4-/58" from center to center left and right
- 3/4" hole diameter
|
43078
Lunette Ring - 1-1/2" Shank
Lunette ring with 2-1/2" diameter and 1-1/2" shank. 15,000 lbs GTW
|
43079
3" Trailer Lunette Ring - Adjustable With Bracket
Trailer Lunette Ring - Adjustable lunette ring
- 2-3/4" inside ring diameter
- 1-5/8" ring thickness
- Includes mounting channel
- Capacity: 12,000 lbs GTW
|
PS
Pintle Sleeve
Fits Convert-A-Ball Pintle Hitches Only. 
|
28023
Lunette Ring Trailer Lock
Lunette/Tow Ring Lock - Fits 2-1/2" and 3" Diameter Lunette Rings
- Push-button High Security Lock
- No Additional Tools Required
- Stainless Steel Locking Pin
- Powder Coat Finish
- Covers Ball Cavity
- High Strength Body
|
EZTL60-40D
Lunette Trailer Lock (2 piece)
Tow/Lunette Ring Lock with Padlock  | Picture of Included Master Lock Padlock. Padlock has 3/8" Shackle. |
|
| |
