| Locks |
|---|
|
3774DAT
Master Lock Keyed Alike Trailer Towing Lock Set
Master Lock Keyed Alike Trailer Lock Set - Keyed alike lock set includes:
- 377DAT coupler lock - for use when not trailer is not hooked up.
- 1473DAT trailer hitch lock fits both 1-1/4" x 1-1/4" and 2" x 2" trailer hitches.
- 1475DAT trailer coupler latch lock - for use when trailer is in tow.
- Hitch lock (1473DAT) fits 1-1/4" x 1-1/4" and 2" x 2" trailer hitches
- 1/2" diameter pin
- 5/8" diameter sleeve included for 2" trailer hitches
- Inside Width: 2-3/4"
- Overall Length: 6"
- Coupler latch lock (1475DAT)
- 1/4" diameter pin
- Inside Width: 7/8"
- Overall Length: 4-5/16"
- Trailer hitch and coupler latch lock have covered key slots to prevent corrosion
- Chrome plated for maximum rust resistance
- Includes storage bag
 
|
5200
Trailer Hitch Receiver Lock - Padlock Style For 1-1/4" Trailer Hitch Receiver
Trailer Hitch Receiver Lock - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Simple Snap On Design
- Chrome Plated Pin and Covered Key Slot Prevent Rust and Corrosion
- Fits 1-1/4" x 1-1/4" Trailer Hitches (Class I and Class II)
- 1/2" diameter pin
- Overall Length: 6-3/4"
- Inside Width: 3-1/8"
|
7682
Trailer Hitch Receiver Lock - Flush Design for 1-1/4" Trailer Hitch Receiver
Receiver lock for 1-1/4" x 1-1/4" receivers. Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Dead Bolt Receiver Style with Flush Locking Design
- Fits 1-1/4" x 1-1/4" trailer hitches (class I and class II)
- 1/2" diameter pin
- Inside Width: 1-5/8"
- Overall Length: 5"
- Covered key slot prevents corrosion
- Double chrome plated for maximum rust resistance
- Patented pick-proof screw-and-lock security
- Multiple Locks are Available Keyed Alike
- Simply select the keyed alike option from the drop down menu above and enter the number of locks needed into the quantity box.
|
9000-0061
Trailer Hitch Lock for 1-1/4" Trailer Hitches
Receiver lock for 1-1/4" x 1-1/4" receivers. Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Dead Bolt Receiver Style with Flush Locking Design
- Fits 1-1/4" x 1-1/4" trailer hitches (class III and class IV)
- 1/2" diameter pin
- Inside Width: 1-15/16"
- Overall Length: 5"
- Covered key slot prevents corrosion
- Polished chrome finish resists corrosion
- Rubber grips make lock durable and easy to handle
- Quarter turn opens lock
|
40106
Trailer Hitch Receiver Lock - Stainless Steel Flush Design for 1-1/4" Trailer Hitch Receiver
Stainless Steel Trailer Hitch Receiver Lock - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Dead Bolt Receiver Style with Flush Locking Design
- Fits 1-1/4" x 1-1/4" trailer hitches (class I and class II)
- 1/2" diameter pin
- Inside Width: 1-5/8"
- Overall Length: 5"
- Covered Key Slot Prevents Corrosion
- Solid Stainless Steel Pin and Lock Housing Will Not Rust or Corrode
- Patented Pick-Proof Screw-and-Lock Security
- Multiple Locks are Available Keyed Alike
- Simply select the keyed alike option from the drop down menu above and enter the number of locks needed into the quantity box.
|
7680
Pro-Tech Trailer Hitch Receiver Lock for 1-1/4" Trailer Hitch Receiver
Trailer Hitch Receiver Lock - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Stylish new design
- Covered Key Slot Prevents Corrosion
- Thumb Wheel Activated For Ease of Use (don't need the key to lock)
- Automotive Style Key
- Double Chrome Plated to Resist Rust and Corrosion
- Made in the U.S.A.
- Fits 1-1/4" x 1-1/4" Trailer Hitch Receivers (Class I and Class II)
- 1/2" diameter pin
- Overall Length: 5-1/2"
- Inside Width: 1-5/8"
|
DT6148
Cable & Ballmount Lockset 1-1/4" Trailer Hitch Receiver
Cable and drawbar lockset for 1-1/4" receivers. - Locks Bike Carrier to the Vehicle's Hitch, Locks Bikes to the Bike Carrier
- Cable and hitch locks are keyed alike
- Double chrome plated for maximum rust resistance
- Patented pick-proof screw-and-lock security
- Locks resist rust, corrosion and clogging
- 5/16" x 10' Cable Lock
|
1480DAT
Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches - Stainless Steel
Stainless Steel Trailer Hitch Lock - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Hitch lock designed for 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" (Class III and Class IV) trailer hitches
- 1/2" diameter pin
- Sleeve included to increase to 5/8" diameter
- Overall Length: 6"
- Inside Width: 2-5/8"
- Automotive style key
- Made of Stainless Steel
|
2866DAT
Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches
Swivel Trailer Hitch Lock - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. Swivel head makes it easy to access the hitch lock on vehicles that have trailer wiring or bumpers close. - Hitch lock designed for 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" (Class III and Class IV) trailer hitches
- 1/2" diameter pin
- Sleeve included to increase to 5/8" diameter
- Overall Length: 6"
- Inside Width: 2-5/8"
- Automotive style key
- Weather tough seal and water tight cap protect solid brass lock cylinder
- Chrome plated hardened steel pin for improved wear and corrosion resistance
- Turn key 90° to lock and unlock
 
|
7684
Trailer Hitch Receiver & Coupler Lockset - 1-1/4" Trailer Hitch Receiver
Trailer Hitch Receiver and trailer coupler lock set
- Locks are keyed alike
- Includes 7682 and 7690
|
5201
Trailer Hitch Receiver Lock - Padlock Style for 2" Trailer Hitch Receiver
Trailer Hitch Receiver Lock - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Simple Snap On Design
- Chrome Plated Pin and Covered Key Slot Prevent Rust and Corrosion
- Fits 2" x 2" and 2-1/2" x 2-1/2" Trailer Hitches
- 5/8" diameter pin
- Overall Length: 7-1/4"
- Inside Width: 3-1/2"
|
7683
Trailer Hitch Receiver Lock - Flush Design for 2" Trailer Hitch Receiver
Receiver lock for 2" x 2" receivers. Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Dead Bolt Receiver Style with Flush Locking Design
- Fits 2" x 2" trailer hitches (class III and class IV)
- 5/8" diameter pin
- Inside Width: 2-5/8"
- Overall Length: 6"
- Covered key slot prevents corrosion
- Double chrome plated for maximum rust resistance
- Patented pick-proof screw-and-lock security
- Multiple Locks are Available Keyed Alike
- Simply select the keyed alike option from the drop down menu above and enter the number of locks needed into the quantity box.
|
9000-0060
Trailer Hitch Receiver Lock for 2" Trailer Hitches
Receiver lock for 2" x 2" receivers. Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Dead Bolt Receiver Style with Flush Locking Design
- Fits 2" x 2" trailer hitches (class III and class IV)
- 5/8" diameter pin
- Inside Width: 2-3/4"
- Overall Length: 5-7/8"
- Covered key slot prevents corrosion
- Polished chrome finish resists corrosion
- Rubber grips make lock durable and easy to handle
- Quarter turn opens lock
|
40107
Trailer Hitch Receiver Lock - Stainless Steel Flush Design for 2" Trailer Hitch Receiver
Stainless Steel Trailer Hitch Receiver Lock - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Dead Bolt Receiver Style with Flush Locking Design
- Fits 2" x 2" trailer hitches (class III and class IV)
- 5/8" diameter pin
- Inside Width: 2-5/8"
- Overall Length: 6"
- Covered Key Slot Prevents Corrosion
- Solid Stainless Steel Pin and Lock Housing Maximizes Rust Resistance
- Patented Pick-Proof Screw-and-Lock Security
- Multiple Locks are Available Keyed Alike
- Simply select the keyed alike option from the drop down menu above and enter the number of locks needed into the quantity box.
|
7681
Pro-Tech Trailer Hitch Receiver Lock For 2" Trailer Hitch Receiver
Trailer Hitch Lock for 2" receivers - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Stylish new design
- Covered Key Slot Prevents Corrosion
- Thumb Wheel Activated For Ease of Use (don't need the key to lock)
- Automotive Style Key
- Double Chrome Plated to Resist Rust and Corrosion
- Made in the U.S.A.
- Fits 2" x 2" Trailer Hitch Receivers (Class III and Class IV)
- 5/8" diameter pin
- Overall Length: 6-1/2"
- Inside Width: 2-1/2"
|
TK8002
Trailer Hitch Receiver Lock - Stainless Steel Push Button Design for 2" Trailer Hitch Receiver
Stainless Steel Trailer Hitch Lock - Use in place of standard pin and clip. Prevents drawbar or accessory (bike rack/cargo carrier) theft. - Hitch lock designed for 2" x 2" (Class III and Class IV) trailer hitches
- 5/8" diameter pin
- Overall Length: 7-1/4"
- Inside Width: 3"
- Easy-to-use push button lock mechanism permits fast locking without using the key
- Automotive style key
- Made of Stainless Steel
|
76820
Valley Anti-Rattle and Lock for 2" Trailer Hitch Receiver
Trailer Hitch Lock and Anti-Rattle Device. Block with spring is placed inside the ballmount and drawn to the side of the hitch tube when the pin is tightened. This pushes the ballmount or hitch accessory up against the side of the hitch tube, dramatically reducing movement and vibration. A great alternative to the J-Pin and a second hole isn't needed. - Fits 2" x 2" Trailer Hitches
- 5/8" Diameter Pin
- Overall Length: 6-1/8"
- Inside Width: 2-5/8"
- Acts as an Anti-Rattle Device
- Requires Ballmount or Hitch Accessory to have a Hollow Shank
- Wrench Included
Display of how the 76820 works. Not an actual picture of 76820.  | Step 1: Place the block inside the shank of the ballmount, bike rack or cargo carrier. |  | Step 2: Push the ballmount into the hitch. Then slide the lock through the hitch pin hole and tighten with included wrench. |
|
7651
Draw-Tite J-Pin Stabilizing Pin with Square Lock for 2" Trailer Hitch Receivers
- Feel Secure with Theft-Preventing Lock & Rattle Free Noise
- Ideal for Bike Carriers & Hitch Mounted Cargo Carriers
- Draw-Tite J-PinTM Compatible Hitch Required (See Below)
- Simple Snap On Lock Design
- Packaged complete with J-Pin, Lock & Key, Wrench (Pictured Below), and Cap
- Works with Hollow or Solid Shank Ballmounts and Hitch Accessories
Draw-Tite's Exclusive J-PinTM Ready Receiver Design Allows for the most Confident and Secure Hookup in Today's Towing Market by Compressing the Hitch Mounted Accessory against the Inner Side Wall of the Hitch Receiver Tube. Once attached, the Hitch and Towing Components seem virtually Welded together.
Draw-Tite's J-PinTM Quickly and Confidently Secures Ball Mounts and other Hitch Mounted Accessories, eliminating the Sway and Rattle caused by necessary part clearance issues.
 |  | | J-Pin Installed | J-Pin Compatible Hitch |
Replaces 8322
|
8322
Draw-Tite J-Pin Stabilization Pin and Barrel Lockset for 2" Trailer Hitch Receivers
Draw-Tite J-Pin™ Locking Anti-Rattle Device - Feel Secure with Theft-Preventing Lock & Rattle Free Noise
- Ideal for Bike Carriers & Hitch Mounted Cargo Carriers
- Draw-Tite J-Pin™ Compatible Hitch Required (See Below)
- Packaged complete with J-Pin, Lock & Key, Wrench (Pictured Below), and Cap
- Works with Hollow or Solid Shank Ballmounts and Hitch Accessories
Draw-Tite's Exclusive J-Pin™ Ready Receiver Design Allows for the most Confident and Secure Hookup in Today's Towing Market by Compressing the Hitch Mounted Accessory against the Inner Side Wall of the Hitch Receiver Tube. Once attached, the Hitch and Towing Components seem virtually Welded together.
Draw-Tite's J-Pin™ Quickly and Confidently Secures Ball Mounts and other Hitch Mounted Accessories, eliminating the Sway and Rattle caused by necessary part clearance issues.
 | | | | J-Pin™ Installed | J-Pin™ Compatible Hitch | Similar to 7651
|
DT5998
Gorilla Guard Cable Lock 15'
15' Gorilla Guard cable lock for bike carriers.
|
DT6149
Cable & Ballmount Lockset 2" Trailer Hitch Receiver
Cable and ballmount lockset for 2" trailer hitches. - Locks Bike Carrier to the Vehicle's Hitch, Locks Bikes to the Bike Carrier
- Cable and hitch locks are keyed alike
- Double chrome plated for maximum rust resistance
- Patented pick-proof screw-and-lock security
- Locks resist rust, corrosion and clogging
- 5/16" x 10' Cable Lock
|
7685
Trailer Hitch Receiver & Coupler Lockset - 2" Trailer Hitch Receiver
Trailer Hitch Receiver and Trailer Coupler Lock Set - Both locks are keyed alike
- Includes 7683 and 7690
|
DT5997
Gorilla Guard Cable Lock 6'
6' Gorilla Guard cable lock for use with bike carriers.
|
MLPCL
Master Lock Python (TM) Locking Cable
Cord Length is 6', 15' or 30' - Specify Above. The new, patented Python™ adjustable locking cable adjusts to perfectly fit a wide range of security needs. - Locking Mechanism holds Cable Tight at any Position
- Cut-Resistant: 100% Braided Steel Cable
- Rust-Resistant: Lock Body and Cable
- Scratch-Resistant: Vinyl-Coated Cable
|
3008
Trailer Coupler Lock - Butterfly Style
Butterfly style trailer coupler lock. Works with most straight tongue style couplers. Includes two keys. - 1/4" pin diameter
- Spans 3/4"
|
605DAT
Master Lock Trigger Style Coupler Lock for 1-7/8" and 2" Couplers
Master Lock Trigger Lock for 1-7/8" & 2" Couplers - 1/4" Shackle Diameter
- 11/16" Shackle Length
- Protected Case-Hardened Steel Shackle Resists Cutting and Sawing
- Built-In Anti-Sawing Pin for Maximum Protection
- Solid Brass Case for Corrosion Resistance
- Precision Pin Tumbler Mechanism for Superior Pick Resistance
|
2847DAT
Master Lock Adjustable Trailer Coupler Lock - Stainless Steel
Master Lock Adjustable Trailer Coupler Lock for Latch Style Couplers - Stainless steel prevents rust and corrosion
- Fits coupler latch widths of:
- 5/8" - most standard couplers
- 1" - most 2-5/16" ball couplers
- 2" - most wide latch couplings such as Atwood, Titan and more
|
7690
Trailer Coupler Lock - Deadbolt Style 1/2" Span
Coupler lock for tab style couplers. - Pin Diameter: 1/4"
- Inside Width: 1/2"
- Overall Length: 4-1/8"
- Dead Bolt Receiver Style with Flush Locking Design
- Covered Key Slot Prevents Corrosion
- Silver Colored Key
- Helps Prevent Coupler Release From Ball
- Helps Prevent Attaching Unattended Trailer To Ball
- Multiple Locks are Available Keyed Alike
- Simply select the keyed alike option from the drop down menu above and enter the number of locks needed into the quantity box.
|
7691
Trailer Coupler Lock - Deadbolt Style 2" Span
Coupler lock for 2" span couplers. - Dead Bolt Receiver Style with Flush Locking Design
- Covered Key Slot Prevents Corrosion
- Silver Colored Key
- Helps Prevent Coupler Release From Ball
- Helps Prevent Attaching Unattended Trailer To Ball
- Pin Diameter: 1/4"
- Pin Length: 2"
- Multiple Locks are Available Keyed Alike
- Simply select the keyed alike option from the drop down menu above and enter the number of locks needed into the quantity box.
|
7692
Trailer Coupler Lock - Deadbolt Style for Surge Brake with 2-1/2" Span
Coupler lock for most surge brake style couplers. - Pin Diameter: 1/4"
- Dead Bolt Receiver Style with Flush Locking Design
- Silver Colored Key
- Covered Key Slot Helps Prevent Corrosion
- Helps Prevent Attaching Unattended Trailer To Ball
- Multiple Locks are Available Keyed Alike
- Simply select the keyed alike option from the drop down menu above and enter the number of locks needed into the quantity box.
|
379DAT
Master Lock Universal Trailer Coupler Lock
Master Lock Universal Trailer Coupler Lock - Gaurds Against Trailer Towaway Theft
- Fits most 1-7/8", 2" and 2-5/16" Ball Diameters of the following Coupler Brands:
- Reese, Fulton, Valley, Atwood, Shelby, Putnam, Hammerblow, Dutton Lainson, UFP
- Advanced Locking Mechanism Resists Picking and Prying
- Easy to Install and Remove
- Resists Rust and Corrosion
- Limited Lifetime Warranty
 | | The ball part of the lock slides in and out and to ensure a snug fit. |  | | The inside portion of the lock is designed with ridges that contour many styles of couplers. | 
|
377DAT
Master Lock 1-7/8" and 2" Trailer Coupler Lock
Master Lock Trailer Coupler Lock - Gaurds Against Trailer Towaway Theft
- Fits Most 1-7/8" and 2" Ball Diameters of the following Coupler Brands:
- Reese, Fulton, Valley, Atwood, Putnam, Marvel, Ideal, Acme, Dutton-Lainson
- Advanced Locking Mechanism Resists Picking and Prying
- Easy to Install and Remove
- Resists Rust and Corrosion
- Lifetime Guarantee
Lock can be keyed alike so that the same key will work on multiple locks. Simply select the keyed alike option above and then enter the number of locks needed. Note: Cannot key the locks to match other styles of locks. Keyed alike option will only match other 377DAT locks. 
|
378DAT
Master Lock 2-5/16" Trailer Coupler Lock
Gaurds against trailer towaway theft. - Fits 2-5/16" (48 mm) ball diameter couplers of the following brands:
- Atwood
- Reese
- Fulton
- Shelby
- Valley
- Dutton-Lainson
- Putnam
- Acme
- Ideal
- Advanced Locking Mechanism Resists Picking and Prying
- Easy to Install and Remove
- Lifetime Guarantee
Lock can be keyed alike so that the same key will work on multiple locks. Simply select the keyed alike option above and then enter the number of locks needed. Note: Cannot key the locks to match other styles of locks. Keyed alike option will only match other 378DAT locks.
|
5202
Coupler Lock - Gorilla Guard for 1-7/8" Couplers
Fulton Gorilla Guard Coupler Lock for 1-7/8" Couplers - Fits 1-7/8" Couplers
- Easy Single Action Key
- Protects Unattended Trailers
- Design Shields Lock From Tampering Devices
|
5203
Trailer Coupler Lock - Gorilla Guard for 2" Couplers
Gorilla Guard Coupler Lock for 2" Trailer Couplers - Features:
-
- Fits 2" Couplers
- Easy Single Action Key
- Protects Unattended Trailers
- Design Shields Lock From Tampering Devices
- Specs:
- Fits most 2" trailer couplers
- Coupler width (including lip) cannot exceed 3-13/16"
- Height of coupler lip cannot be greater than 5/16"
|
5204
Trailer Coupler Lock - Gorilla Guard For 2-5/16" Couplers
Fulton Gorilla Guard Coupler Lock for 2-5/16" Trailer Couplers - Features:
-
- Fits 2-5/16" Couplers
- Easy Single Action Key
- Protects Unattended Trailers
- Design Shields Lock From Tampering Devices
- Specs:
- Fits most 2-5/16" trailer couplers
- Coupler width (including lip) cannot exceed 4-1/8"
- Height of coupler lip cannot be greater than 5/16"
|
V75692
Trailer Coupler Lock - Universal
Universal Trailer Coupler Lock - Fits Most 1-7/8", 2" and 2-5/16" Trailer Couplers
|
4324
Dead Bolt Spare Tire Lock
Adjustable Dead Bolt Spare Tire Lock
- Strong 2 piece steel design
- Locks lug bolt opening
- Adjustable design fits rim thickness from 1/4" to 7/8"
- Multiple Locks are Available Keyed Alike
- Simply select the keyed alike option from the drop down menu above and enter the number of locks needed into the quantity box.
|
50222
King Pin Fifth Wheel Lock
Fifth Wheel Trailer King Pin Lock - protects fifth wheel trailers 
|
50057
Gooseneck Trailer Lock
Ideal theft deterent for gooseneck style trailers. For use while parked and unhitched. 
|
EZTL50-40D
Gooseneck Trailer Lock
Precision made of aircraft aluminum, the brackets will not rust and are highly visible to discourage would-be thieves. - Fits most 2-5/16" Gooseneck Couplers
- Easy to Install - place bracket over the the coupler, insert the pin, and attach padlock
|
28023
Lunette Ring Trailer Lock
Lunette/Tow Ring Lock - Fits 2-1/2" and 3" Diameter Lunette Rings
- Push-button High Security Lock
- No Additional Tools Required
- Stainless Steel Locking Pin
- Powder Coat Finish
- Covers Ball Cavity
- High Strength Body
|
37DAT
Master Lock Shrouded Padlock
Master Lock Armored Shrouded Padlock - Features:
-
- Armored hardened steel shackle defies cutting
- 1-9/16" laminated steel body for superior strength
- 4-pin tubmler cylinder helps prevent picking
- Shackle guard protects against bolt cutters and hacksaws
- Ideal for securing trailers, cables and chains
-
- Specs:
-
- Shackle with guard fits openings 1/2" in diameter or larger
- Shackle guard is removable to accomodate openings 9/32" in diameter
- Opening in the center of the lock measures 7/16" wide x 15/16" tall
Lock can be keyed alike so that the same key will work on multiple locks. Simply select the keyed alike option above and then enter the number of locks needed. Note: Cannot key the locks to match other styles of locks. Keyed alike option will only match other 37DAT locks.  
|
EZTL60-40D
Lunette Trailer Lock (2 piece)
Tow/Lunette Ring Lock with Padlock  | Picture of Included Master Lock Padlock. Padlock has 3/8" Shackle. |
970DPF
Master Lock Hidden Shackle Padlock
Master Lock Hidden Shackle Trailer PadLock - Features:
-
- Hardened solid steel body is strong, durable and resists corrosion
- Protected shackle design prevents prying, cutting and sawing
- 6 Pin cylinder for maximum pick resistance
- Specs:
-
- Measures 2-7/8" in diameter and 1-1/2" thick
- Hidden Shackle Opening: 1-11/16" wide x 9/16" tall x 1" deep
- 7/16" shackle diameter
Lock can be keyed alike so that the same key will work on multiple locks. Simply select the keyed alike option above and then enter the number of locks needed. Note: Cannot key the locks to match other styles of locks. Keyed alike option will only match other 970DPF locks.  
|
|
| |
| |
