| Brake Controllers |
|---|
Electric Brake Controllers We offer electronic brake controllers from the best manufacturers like Tekonsha, Draw-Tite, Hidden Hitch, Pilot and Hayes. There is also a large selection of how-to information with commonly asked questions, installation tips on specific vehicles and more.
|
39523
Tekonsha Powertrac 2-4 Electric Brake Controller - Time Delayed
- For 2-4 Brakes (1-2 axles)
- Power-on LED for a Positive Tow Vehicle-to-Trailer Connection
- Green indicator light illuminates when brakes are connected and changes to orange then red as power to trailer brakes increases
- "Up-front" Manual Override Control
- Thumb Wheel Output Adjustment
- Any Direction Mounting
- Five Year Limited Warranty
- Dimensions: 5" (l) x 3" (W) x 1-1/4" (H)
 - Required
- 20 amp. Circuit Breaker (9506P)
- Recommended
- Pulse Preventer (5501)
|
V52650
Valley Journey (TM) 2-4 Electric Brake Controller - Time Delayed
Valley Journey™ Electric Trailer Brake Controller An affordable brake control with ample power. The Journey™ trailer brake control offers adjustable power output and multiple reaction time settings. Contained in a compact design that can be mounted in any position, Journey's solid-state design provides trouble-free stopping for trailers with electric brake systems. - Features:
-
- Designed for 2 and 4 brake trailers
- LED Indicator
- Simple to use thumb wheel controls for both Output (power) and Ramp Time (reaction time or "sync")
- Diagnostics system continually checks for shorts
- Solid state controller means no moving parts or pendulums
- Mounts anywhere - no leveling required
- Manual override will activate brake lamps
- Includes mounting bracket
- 5 year limited warranty
- Made in the U.S.A.
- Specs:
-
- Dimensions: 3" (W) x 5-1/4" (L) x 1-1/4" (H)
- Made for up to tandem axle trailer brake systems (4 Brakes)
- Required: For vehicles without brake control adapters.
- 20 amp. Circuit Breaker (9506p)
 
|
5100
DrawTite 2-4 Brake Electronic Brake Controller - Time Delayed
- Designed For 2 and 4 Brake Trailers
- 12,000 lbs. Capacity
- Illuminated Output Indicator
- Slide Adjustment Output Control
- Three Year Limited Warranty
- 100% Solid State
- No Hydraulic Connections
- No Moving Parts or Pendulums
- Mounts Anywhere - No Leveling Required
- Dimensions: 3" (W) x 5-3/8" (L) x 1" (H)
Draw-Tite's Activator electronic brake control for trailers with electric brakes apply the trailer's brakes electronically as soon as the brake pedal is engaged, unlike pendulum models which react to inertia created after the tow vehicle's brakes have already begun to stop. The amount of braking power (output) and rate of application (sync) are both adjustable for the individual driver's preference, road conditions, type of trailer and load. The driver can control the amount and rate of braking from soft to aggressive and the brakes can be manually applied. Typical Installation Instructions
- Required
- 20 amp. Circuit Breaker (9506P)
- Recommended
- Pulse Preventer (5501)
|
V52740
Valley Journey HD 2-8 Electric Brake Controller - Time Delayed
Valley Journey HD™ Electric Trailer Brake Controller - Features:
-
- Designed for 2, 4, 6 and 8 brake trailers
- Easy to read digital display
- Simple to use thumb wheel controls for both Output (power) and Ramp Time (reaction time or "sync")
- Diagnostics system continually checks for shorts
- Solid state controller means no moving parts or pendulums
- Mounts anywhere - no leveling required
- Manual override will activate brake lamps
- Manual override has 100% power
- Includes mounting bracket
- Limited lifetime warranty
- Made in the U.S.A.
- Specs:
-
- Dimensions: 3-1/8" (W) x 5-1/2" (L) x 1-1/2" (H)
- Made for up to four-axle trailer brake systems (8 Brakes)
Typical Installation Instructions
- Required: For vehicles without brake control adapters.
- 30 amp. Circuit Breaker (38630)
- See Also:
- The Draw-Tite Act II (# 5500) brake controller.
|
5500
DrawTite 2-8 Brake Electronic Brake Controller - Time Delayed
Draw-Tite Activator II Electric Trailer Brake Controller - Designed For 2, 4, 6 and 8 Brake Trailers
- Digital Output Indicator
- Thumb Wheel Output Adjustment
- Overload Indicator
- Lifetime Limited Warranty
- 100% Solid State
- No Hydraulic Connections
- No Moving Parts or Pendulums
- Mounts Anywhere - No Leveling Required
- Dimensions: 3-3/16" (W) x 6-1/8" (L) x 1-1/4" (H)
Draw-Tite's Activator II electronic brake control for trailers with electric brakes apply the trailer's brakes electronically as soon as the brake pedal is engaged, unlike pendulum models which react to inertia created after the tow vehicle's brakes have already begun to stop. The amount of braking power (output) and rate of application (sync) are both adjustable for the individual driver's preference, road conditions, type of trailer and load. The driver can control the amount and rate of braking from soft to aggressive and the brakes can be manually applied. Typical Installation Instructions
- Required
- 30 amp. Circuit Breaker (38630)
- Recommended
- Pulse Preventer (5501)
- See Also:
- The Valley Journey HD™ (# V52740) brake controller.
74643
|
5510
2-8 Brake Hand-held Electronic Brake Controller by Reese - Time Delayed
- Designed For 2, 4, 6 & 8 Brake Trailers
- Digital Output Indicator
- Push Button Output Adjustment
- Overload Indicator
- Lifetime Limited Warranty
- 6' Detachable Coiled Cord
- Convenient Hand-Held Design Mounts Anywhere
All of the Activator III's easy to use control functions and displays are located in the hand-held remote, while the main circuitry is mounted out of sight under the vehicle’s dash. Activator III features improved ramp timing which smoothes the braking of smaller trailers, yet packs the power to stop larger multi-axled trailers.
Typical Installation Instructions
- Required
- 30 Amp Circuit Breaker (9508P)
- Recommended
- Pulse Preventer (5501)
|
39518
Pilot 2-6 Brake Electronic Brake Controller - Time Delayed
- Works for 2-6 Brakes (up to 3 brake axles)
- New Pivot Mount Included
- LED Numeric Display Shows Voltage Output
- Circuit Protection
- 3-year Limited Warranty
- Dimensions: 3-1/2" (W) x 4-3/4" (L) x 1-9/16" (H)
- Required
- 20 amp. Circuit Breaker (9506P) for 2-4 Brake applications
- 30 amp. Circuti Breaker (38630) for 6 Brake applications
- Recommended
- Pulse Preventer (5501)
Typical Installation Instructions
|
39510
Tekonsha #9030 Voyager Brake Activator - Proportional
Tekonsha Voyager Electric Trailer Brake Controller Inertia or Pendulum style controllers are enabled by the brake pedal switch and activated by a Pendulum Circuit that senses the vehicle's stopping motion and applies a proportional voltage to the trailer's brakes. The Brake Controller must be mounted and calibrated level. - Features:
-
- Designed for 2, 4, 6 and 8 brake trailers
- Green LED Monitors a Secure Connection with Trailer and Changes to Red to Indicate an Increase of Power to the Trailer Brakes
- Inertia Activated (Proportional Braking Power)
- Ergonomically Designed Control Lever for Easy, Accurate Gain and Level Settings
- Includes Mounting Bracket
- 5-year Limited Warranty
- Specs:
-
- Dimensions: 3" (W) x 5" (L) x 1-1/2" (H)
- Made for up to four-axle trailer brake systems (8 Brakes)
- Must be mounted between -20° and 70° vertically
Typical Installation Instructions
- Required:
- 20 amp. Circuit Breaker (9506P)
|
90155
Tekonsha Primus (TM) Electric Brake Controller - Proportional
Tekonsha Primus ™ Proportional Electric Trailer Brake Control. Replaces the 9055 Tekonsha Sentinel Brake Controller. Primus™ utilizes Prodigy® technology and features the Tekonsha one step "Point and Go" set-up system. The Primus™ brake controller is not auto-leveling like the Prodigy and Odyssey. However, it is very easy to set the controller. Just point the sensor position arm on the side of the contoller to the floor of the vehicle. - Features:
-
- Applies power to the trailer brakes in proportion to vehicle's deceleration
- Proportional braking translates into faster and smoother stopping with less wear and tear on both the vehicle and trailer brakes
- Digital display depicts voltage delivery to trailer during braking
- Diagnostics check for proper connection
- Unique pocket mount allows for flexible mounting options
- Quick and easy disconnect feature allows user to remove and store the control when not in use
- Utilizes same wiring plug as Tekonsha Prodigy
- Limited 15 year warranty
- Specs:
-
- Dimensions: 3-1/2" (W) x 4-9/16" (L) x 1-1/4" (H)
- Made for up to three-axle trailer brake systems (6 Brakes)
- Can be mounted between 0° (level) and 70°
Typical Installation Instructions - Required: For vehicles without brake control adapters.
- 20 amp. Circuit Breaker (9506P) for 2-4 Brake applications
- 30 amp. Circuit Breaker (38630) for 6 Brake applications
  |  |  | | Pointing the switch towards the floor sets the controller for normal braking. For heavier or lighter loads the sensor positioning arm can be manuevered to make the control more or less aggressive. |  |  | | The pocket is designed for easy mounting and unmounting. It also allows for flexible positioning of the controller under the dash. | 
|
90185
Tekonsha PRODIGY (TM) Brake Controller - Proportional
Tekonsha introduces PRODIGY ® one of the most advanced and intelligent approaches to trailer brake controls. PRODIGY ®, requiring no manual leveling, is a technological breakthrough among inertia-activated brake controls. Equipped with a self-adjusting sensing device similar to the one used in guided-missile technology to allow for easy, flexible installation — from nearly horizontal to nearly vertical — the Tekonsha PRODIGY® constantly adjusts itself to the position of the tow vehicle.
- Features:
-
- Applies power to the trailer brakes in proportion to vehicle's deceleration.
- No level adjustment necessary - it adjusts itself to varying terrain as you drive.
- Works proportionally in reverse - great for backing into tough spots.
- Digital display depicts voltage delivery to trailer during braking.
- Continual diagnostics check for proper connection, shorted magnet condition and much more.
- "Boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers.
- Power-saving mode reduces drain on battery when vehicle is not in use.
- Unique pocket mount allows for flexible mounting options.
- The Podigy, along with the Tekonsha Primus, offers a replacement pocket and wiring harness (sold separately) to move the controller easily from one vehicle to another
- Quick and easy disconnect feature allows user to remove and store the control when not in use.
- Rotary manual brake adjustment lever
- Limited lifetime warranty
- Specs:
-
- Dimensions: 3-1/8" (W) x 5-1/8" (L) x 1-3/16" (H)
- Made for up to four-axle trailer brake systems (8 Brakes)
- Can be mounted between 0° (level) and 70°
- Boost levels increase power up 0%, 13% and 25%
- Power saving sleep mode draws 3.6 milliamp
Typical Installation Instructions - Required: For vehicles without brake control adapters.
- 20 amp. Circuit Breaker (9506P) for 2-4 Brake applications
- 30 amp. Circuit Breaker (38630) for 6-8 Brake applications
- See also:
- The Valley Odyssey™ Brake Controller - with an even wider mounting range and an additional boost level, it's even easier to install and use.
|
52810
Valley Odyssey (TM) Electric Trailer Brake Controller - Proportional
Temporary Price Reduction - WAS $139.95! Valley Odyssey™ Inertia Activated Electric Trailer Brake Controller All of the braking features (and then some) of the Prodigy™! The new double-axis accelerometer technology continually checks and then adjusts for varying road terrain. The brake controller also senses the vehicles rate of deceleration and applies a proportionate amount of braking power to the trailer as fast as is needed, providing only the smoothest of stops. - Features:
-
- Aside from smoother stops, proportional braking means less wear on both the trailer and vehicle brakes
- Works proportionally even traveling in reverse
- Auto-leveling for an even easier installation
- Exclusive 4 Load Range ("Boost") settings for even greater adjustment
- Manual override will still activate brake lamps
- Easy to read digital display
- Diagnostics system continually checks for shorts and trailer connection
- Power saving mode increases vehicle battery life
- Includes mounting bracket
- Additional mounting brackets are sold separately making it easier to use the same controller in more than one vehicle
- New easy disconnect feature allows removal and storage the controller when not in use
- Vehicle specific wiring adapters are available (sold separately) to make installation simple
- Limited lifetime warranty
- Specs:
-
- Dimensions: 3-1/4" (W) x 5-1/4" (L) x 1-3/4" (H)
- Made for up to four-axle trailer brake systems (8 Brakes)
- Exclusive 180° vertical plane operating range
- Can be mounted between -90° (straight down) and 90° (straight up)
- 20° horizontal mounting range
- Boost levels increase power up 0%, 16%, 25% and 28%
- Power saving sleep mode draws 1.7 milliamp
- Required: For vehicles without brake control adapters.
-
 
|
18260
Brake Control Wiring Adapter Ford, Lincoln, Mercury
Brake Control Wiring Adapter for Pre-Wired Vehicles:
- 1994-2004 Ford Full Sized Pickups (F-150, F-250 and F-350)
- 2004-2006 Ford F-150
- 1992-2005 Full Size Van
- 1995-2003 Windstar w/Tow Package
- 1994-1996 Bronco
- 1997-2006 Expedition
- 2000-2005 Excursion
- 2002-2006 Explorer/Mountaineer with Tow Package
- 2006 Lincoln Mark LT
- 1998-2006 Lincoln Navigator
|
18267
Brake Control Wiring Adapter 2005-06 Ford Super Duty
Brake Control Wiring Adapter for Pre-Wired 2005 Ford Super Duty Vehicles: - 2005-06 Ford F-250 and F-350 Super Duty Pickups
Tech Tip: The oem plug is located behind the black pocket underneath the radio in the center of the dash. 
|
18262
Brake Control Wiring Adapter 1992-93 Ford
Brake Control Wiring Adapter for Pre-Wired 1992-93 Ford Full Size Pickups and Bronco
|
18261
Brake Control Wiring Adapter Dodge
Brake Control Wiring Adapter for Pre-Wired Vehicles:
- 1995-2006 Dodge Ram Pickups 1500
- 1995-2006 Dodge Ram Pickups 2500 & 3500
- 1997-2006 Dodge Dakota Pickups (with OEM Tow Package)
- 1998-2006 Dodge Durago (with OEM Tow Package)
|
18263
Brake Control Wiring Adapter 1999-02 Chevrolet, GMC, Cadillac
Brake Control Wiring Adapter for Pre-Wired Vehicles:
- 1999-2002 Chevrolet Silverado
- 1999-2002 GMC Sierra Full Size Pickups
- 2002 Chevy Avalanche
- 2000-2002 Chevy Suburban (new body style)
- 2000-2002 Chevy Tahoe (new body style)
- 2000-2002 GMC Yukon & Yukon XL (new body style)
- 2000-2002 Cadillac Escalade & Escalade EXT
|
18266
Brake Control Wiring Adapter Nissan
Brake Control Wiring Adapter for Pre-Wired Nissan Vehicles: - 2005-06 Nissan Frontier
- 2004-06 Nissan Titan
- 2005-06 Nissan Pathfinder
- 2004-06 Nissan Pathfinder Armada
Tech Tip: The harness will be located underneath and left of the steering column, taped to another harness near the emergency brake predal. It is a 6-pin connector that mates with the 18266 brake control wiring adapter. 
|
18264
Brake Control Wiring Adapter 2003 - 06 Chevrolet, GMC, Cadillac
Brake Control Wiring Adapter for Pre-Wired Vehicles: - 2003-06 Chevrolet Silverado
- 2003-06 GMC Sierra Full Size Pickups
- 2003-06 Avalanche
- 2003-06 Suburban
- 2003-06 Tahoe
- 2003-06 Yukon & Yukon XL Including Denali
- 2003-06 Escalade & Escalade EXT
- 2003-06 Hummer H2
|
18265
Brake Control Wiring Adapter 2003 - 06 Toyota and Lexus
Brake Control Wiring Adapter for Pre-Wired Vehicles: - 2003-06 Toyota 4Runner
- 2003-06 Toyota Sequoia
- 2003-06 Toyota Tundra
- 2004-06 Lexus GX470
|
18268
Brake Control Wiring Adapter Honda
Brake Control Wiring Adapter for Pre-Wired Honda Vehicles: Tech Tip: The harness will be located underneath and left of the steering column, taped to another harness near the brake predal. It is a 4-pin connector that mates with the 18268 brake control wiring adapter. 
|
ETBC7
Brake Controller 7 & 4 Way Installation Kit
Includes all parts necessary to install an electric trailer brake controller in your vehicle. Each kit includes: - Includes 25' of wire
- Pre-wired 7 & 4 way connector with mounting bracket
- 7-Way connector plugs into existing 4-way trailer connector on vehicle
- Heavy duty breakers
- 20 amp, 30 amp & 40 amp (for hot lead)
- Ring connectors for battery and breaker hook-up
- Self taping screws
- Tie straps
If your vehicle does not already have a flat 4-Pole installed, the T-One Fitguide can be used to find the easy to install connector made specific for your vehicle.  | | A better view of the 7-way & 4-way trailer connector. | Replaces 39507
|
5505
Wiring Kit for 2 & 4 Brake Electric Brake Controllers
Wiring Kit for 2 and 4 Brake Electric Brake Controllers - Works with all 2 & 4 Brake Systems
- Activator (5100)
- Journey (V52650)
- PowerTrac (39523)
- Voyager (39510)
- Includes:
- 25 ft. 10-2 Duplex Wire
- 20 Amp Circuit Breaker
- Attaching Terminals
|
ETBC6
Brake Controller 6 Way Installation Kit
Includes all parts necessary to install an electric trailer brake controller in your vehicle. Each kit includes: - Includes 25' of wire
- Pre-wired 6 & 4 way connector with mounting bracket
- 6-Way connector plugs into existing 4-way trailer connector on vehicle
- Heavy duty breakers
- 20 amp, 30 amp & 40 amp (for hot lead)
- Ring connectors for battery and breaker hook-up
- Self taping screws
- Tie straps
If your vehicle does not already have a flat 4-Pole installed, the T-One Fitguide can be used to find the easy to install connector made specific for your vehicle.  | | A better view of the 6-way trailer connector. | Replaces 39506
|
5506
Wiring Kit for 2, 4, 6 & 8 Brake Electric Brake Controllers
Wiring Kit for 2, 4, 6 and 8 Brake Electric Brake Controllers - Works with all 2, 4, 6 & 8 Brake Systems
- Activator II (5500)
- Journey HD (V52740)
- Activator III (5510)
- Pilot (39518)
- Primus (90155)
- Prodigy (90185)
- Odyssey (52810)
- Includes:
- 25 ft. 10-2 Duplex Wire
- 30 Amp Circuit Breaker
- Attaching Terminals
|
